Product Overview
Designed to help remove screws with stripped or damaged heads
+ Extractors must be used with drill in reverse.
+ Screw head is reamed with burnishing end, and is then removed with the left turn thread end.
+ Care must be taken to burnish no more than 1/16" (1.5 mm) deep, as burnishing too deep can weaken the screw head.
Product No’s:
7250-00 [Set with Case]
7250-01 [2.5 mm Screw Extractor]
Overall Length: 6"
7250-02 [3.5 mm Screw Extractor]
Overall Length: 6"
7250-03 [6.5 mm Screw Extractor]
Overall Length: 6"
(http://innomed.net/index.htm)
